ESC has fully developed its Trench Shields Series (also known as Trench Boxes) used as a two-sided excavation support system. It is a used as a temporary earth retaining structure which allows safe access to an excavation that has been cut vertically. Stability is ensured within the trench whilst providing a minimal excavation footprint for works to be carried out. This helps prevent any damage to nearby utilities and structures.
4" Standard Trench Shield
Manhole Trench Box
6" Heavy Trench Shield
Designed & manufactured in accordance with OSHA 29 CFR 1926.650, 29 CFR 1926.651 and CFR 1926.652, Subpart P, Excavations.
3rd party product certificates available for all products.
Heavy duty robust design.
Flat pack delivery .
Fixed or adjustable struts available in any required length .
Custom box sizes are available.
Soil pressure must be determined by qualified competent person.
Assembly as per ESC procedures
As a member of NAXSA (North American Excavation Shoring Association) ESC adheres to all industry norms and regulations. We advise all clients to refer to NAXSA Approved Excavation Safety Specifications
ESC completed third party verified structural calculations and professionally completed Finite Element Analysis of the proprietary ESC Trench Box design system, with special attention on the spreader connections to the panels. A wide range of loading conditions was simulated to verify the robustness of the system.
For North American customers all Trench Shoring systems adhere to OSHA 29 CFR 1926.650, 29 CFR 1926.651 and CFR 1926.652, Subpart P, Excavations.
A full scale component test with a third party independent witness was also completed to verify the design calculations with a focus on on the most critically loaded areas and potential weak points. A specially designed test rig was constructed to simulate the soil loads with a series of strain gauges situated throughout the trench panel structure to measure deflection of the structure under various loading combinations.