ESC-Group-Logo-R-PNG.png
Misi.png
ESC-CFW SERIES
COLD FORMED SHEET PILES

The ESC CFW series was developed to enable a wide profile sheet pile to be produced economically without any requirement for interlock clutch welding. ESC-CFW sheet piles have excellent driveability due to the interlock design. A large range of sizes and strengths can be designed. The manufacturing process gives full flexibility in the profile design allowing features such as corner piles, tapered piles. 

TECHNICAL SPECIFICATIONS
Section Modulus Range

13.2-74.4in3/ft

Width Range (single)

​31.69-45.74in

Thickness Range

​0.22-0.46in

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades​
  • Q235B, Q345B, Q345C, Q390B, Q420B

  • S235, S275JR, S355JR, S355JO

  • ASTM A572 Gr42, Gr50, Gr60

  • Others available on request

 
Length

45.9ft maximum 
Longer lengths can be spliced (>98.4ft possible)
Any project specific length can be produced

Delivery Options
  • Lifting Hole

  • Grip Plate

  • By container (38.7ft or less) or Break Bulk

  • Corrosion Protection Coatings​

 
Corner Piles

Due to the flexibility of the forming process, the ESC-C-CFW Series Sheet Piles can be formed to almost any corner configuration, without requiring any wastage or welding. Note that the interlocks should be orientated toward the retained side as shown in the following figures.

1/3
Catalog
Datasheets
Drawings
Daha Fazla Göster
PRODUCT IMAGES
Daha Fazla Göster

PROJECT CASE STUDIES