ESC-CFW Series
Cold Formed Sheet Piles
The ESC CFW series was developed to enable a wide profile sheet pile to be produced economically without any requirement for interlock clutch welding. ESC-CFW sheet piles have excellent driveability due to the interlock design. A large range of sizes and strengths can be designed. The manufacturing process gives full flexibility in the profile design allowing features such as corner piles, tapered piles.
Section Modulus Range
710-4000cm3/m
Width Range (single)
805-1162mm
Thickness Range
5.75-11.75mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
-
Q235B, Q345B, Q345C, Q390B, Q420B
-
S235, S275JR, S355JR, S355JO
-
ASTM A572 Gr42, Gr50, Gr60
-
Others available on request
Length
14.0m maximum
Longer lengths can be spliced (>30m possible)
Any project specific length can be produced
Delivery Options
-
Lifting Hole
-
Grip Plate
-
By container (11.8m or less) or Break Bulk
-
Corrosion Protection Coatings
Corner Piles
Due to the flexibility of the forming process, the ESC-C-CFW Series Sheet Piles can be formed to almost any corner configuration, without requiring any wastage or welding. Note that the interlocks should be orientated toward the retained side as shown in the following figures.
Technical Information
Product Images
Product Case Studies
